Ultimate Pro

• V.O.C. Compliant
• Chemical Properties Within the Formula Change the Surface Tension of Your Stone

Product Description: A unique solvent-based, V.O.C. compliant impregnator sealer, which penetrates grout, stone and masonry surfaces to protect against water and oil staining while allowing substrate to properly breath. Non-yellowing, long-lasting formula. Will not change surface appearance. Specifically designed to bond with quartz and silica materials inherent to granite and grout.

Coverage: Product will cover approximately 200 to 1,000 ft.² per gallon dependant on the porosity of the stone. Two coats are recommended for optimum performance. Cure time: 24 hrs. / repels water, 72 hrs / fully cured.

Directions: Always test product in an inconspicuous area to test suitability for intended use. Surface must be sound, thoroughly clean and free from waxes, sealants or coatings of any kind. For best results, use Stone Pro's Formula 51 stripper before applying Ultimate Pro. Apply product evenly using a low-pressure sprayer or lamb's wool applicator. Do not dilute.

Caution: Combustible. Keep away from heat, open flame, sparks and/or any possible ignition source. Keep work area well ventilated. Gloves and goggles should be worn at all times. Respirator suggested in larger areas or non-ventilated areas. Read directions and other cautions on back of container before use of this product.

View MSDS Information