Crystal Clean Spray

• The Perfect Daily Cleaner for Polished Stone and Surrounding Surfaces
• pH Neutral Cleaner
• No Streaks and Water Spots
• Evaporative Cleaning Action and Surfactants Leaves No Residue
• Ready to Use
• Replenishes Sealant Properties

Product Description: A unique cleaning formulation designed to clean without leaving water spots. Terrific evaporative action. Best for polished stone. Leaves no streaking.

Coverage: Product will cover approximately 200 to 2,000 ft.² per gallon dependant on severity of soiled stone. Dilution rate may slightly reduce cleaning effectiveness. Light duty areas may be diluted up to 12:1.

Directions: Always test product in an inconspicuous area to test suitability for intended use. Always sweep floor thoroughly. Apply Crystal Clean into bucket. Add water and dilute Crystal Clean, as needed. Wipe dirty area clean using premixed Crystal Clean and a clean mop. Repeat as needed. When the solution becomes dirty or cloudy, replace it. For small areas, wipe, scrub and/or agitate solution onto surface using light duty, non-abrasive hand scrubber. Then wipe dry using a clean cloth. This solutions is designed for light duty cleaning. If stone and/or grout become extremely dirty, consider the Stone Pro Deep Clean Gel for better results.